Unexposed Toyobo Photopolymer Letterpress plate KF152 – offcuts
Unexposed Photopolymer letterpress plate KF152 - offcuts
Toyobo Photopolymer Plate – KF152 – 1xA4
KF152 material is 1.52mm thick and recommended for use on any thickness of stock but is best for paper and board
Sticky Mount 10xA4 Sheet pack
‘Sticky Mount’ fixes polymer plates to your Chase Base ready for printing Available in A4 sheet or 300mm x 25m roll form. Sticky Mount
Toyobo Photopolymer Plate – KF95 – 1xA4
KF152 material is 1.52mm thick and recommended for use on any thickness of stock but is best for paper and board
Sticky Mount 5xA4 Sheet pack
‘Sticky Mount’ fixes polymer plates to your Chase Base ready for printing Available in A4 sheet or 300mm x 25m roll form. Sticky Mount
Toyobo Photopolymer Plate – KF95 -10xA4
KF95 material is 0.95mm thick and recommended for use on any thickness of stock. A thinner plate like the KF95
UV Block Bag x1
UV Blocking Bags – A4 size Made from high density material these bags block ultra violet rays which cure photopolymer plates.
Sticky Mount 1x25m Roll
‘Sticky Mount’ fixes polymer plates to your Chase Base ready for printing Available in A4 sheet or 300mm x 25m roll form. Sticky Mount
Unexposed Toyobo Photopolymer Letterpress plate KF95 – offcuts
Unexposed Photopolymer letterpress plate KF95 - offcuts
Toyobo Photopolymer Plate – KF152 – 10xA4
KF152 material is 1.52mm thick and recommended for use on any thickness of stock but is best for paper and board
Toyobo Photopolymer Plate – KM152 – 1xA4
KM152 Toyobo Steel backed photopolymer plate.
Toyobo Photopolymer Plate – KF152 – 5xA4
KF152 material is 1.52mm thick and recommended for use on any thickness of stock but is best for paper and board
A4 Ink Jet Neg Film – 130mic
50 x A4 sheets Ink Jet Neg Film
UV Block Bags x5
UV Blocking Bags – A3 size Made from high density material these bags block ultra violet rays which cure photopolymer plates. If
Toyobo Photopolymer Plate – KF95 -10xA2
KF95 plate is 0.95mm thick and is often used on boards under 400gsm in weight but is as successful on
Toyobo Photopolymer Plate – KF95 – 5xA4
KF152 material is 1.52mm thick and recommended for use on any thickness of stock but is best for paper and board
UV Block Bags x10
UV Blocking Bags – A3 size Made from high density material these bags block ultra violet rays which cure photopolymer plates. If
Sticky Mount 10x25m Roll
‘Sticky Mount’ fixes polymer plates to your Chase Base ready for printing Available in A4 sheet or 300mm x 25m roll form. Sticky Mount
Sticky Mount 5x25m Roll
‘Sticky Mount’ fixes polymer plates to your Chase Base ready for printing Available in A4 sheet or 300mm x 25m roll form. Sticky Mount
Toyobo Photopolymer Plate – KF152 – 10xA2
KF152 material is 1.52mm thick and recommended for use on any thickness of stock but is best for paper and board